ODIS Service 25.0.1 is diagnostic software for Volkswagen Group workshop diagnostics. It is intended for guided fault finding, ECU scans, measured values, service procedures, and diagnostic work on supported VAG vehicles with compatible VCI hardware.

Supported vehicles and models:
– Volkswagen models such as Golf, Passat, Polo, Tiguan, Touran, Touareg, Transporter, Caddy, Arteon, T-Roc, T-Cross, and ID models where supported.
– Audi models such as A1, A3, A4, A5, A6, A7, A8, Q2, Q3, Q5, Q7, Q8, TT, and e-tron models where supported.
– Skoda models such as Fabia, Octavia, Superb, Kodiaq, Karoq, Scala, Kamiq, and Enyaq where supported.
– Seat/Cupra models such as Ibiza, Leon, Ateca, Arona, Tarraco, Formentor, and related models where supported.
– Bentley and Lamborghini coverage may be available depending on brand data and interface.

Supported features:
– Guided diagnostics and guided fault finding.
– Full control unit scan and ECU identification.
– Read and clear DTCs, live data, measured value blocks, basic settings, adaptations, output tests, and service functions.
– Service reset, electronic parking brake service mode, DPF functions, injector functions, calibration routines, and coding/adaptation where supported.
– Online functions may require valid official access and are not guaranteed in offline use.

Required diagnostic tool:
VAS 5054A, VAS 6154, VAS 6154A, VNCI, or compatible VAG pass-thru/VCI interface with correct drivers.

System requirements:
– Windows 10 or Windows 11 64-bit recommended.
– Intel Core i5 recommended.
– 8 GB RAM minimum, 16 GB preferred.
– 80 GB or more free disk space recommended.
– Correct VCI drivers and administrator rights.

Languages:
Multi-language support depends on installed language packs. English, German, French, Spanish, Italian, Czech, Polish, and other European languages are common in ODIS packages.

Delivery and support:
– You will get the software download link right after purchase.
– Detailed installation guide included.
– Installation support included with every tool.

Installation note:
Some older diagnostic packages and USB interface drivers may be blocked by antivirus software during extraction or installation. Use only files from a trusted source, follow the included guide, temporarily pause protection only if required for the installation step, and enable antivirus protection again after the software and drivers are installed.

Disclaimer:
A compatible diagnostic interface is required and is not included unless clearly stated separately. Vehicle coverage, functions, coding options, service procedures, and live data availability depend on the exact vehicle model, production year, ECU type, market, interface quality, driver compatibility, and Windows setup. Always use diagnostic and programming functions carefully and keep a stable battery power supply connected when performing service routines, coding, adaptation, or flashing operations.

Skoda-istuimen vianmääritys

ODIS Service 25.0.1 -diagnostiikkaohjelmisto