Derniers articles

Prepare for ADAS calibration by checking sensors, vehicle geometry, alignment, targets, workspace conditions, scan data, and software limitations.

Understand EV diagnostic safety, qualified-work boundaries, high-voltage isolation, PPE, absence-of-voltage testing, and scan-tool limitations.

Follow a practical crank-no-start workflow using scan data, fuel-pressure testing, crank and cam signals, spark, injection, and mechanical checks.

Learn how active tests command vehicle components, how to interpret the response, and how bidirectional controls can shorten a safe diagnostic workflow.

Learn when to add an oscilloscope to scan-tool diagnosis, how to set up useful captures, and what to consider when choosing automotive equipment.

Learn a disciplined workflow for diagnosing U-codes, missing modules, power faults, and CAN wiring without replacing control modules unnecessarily.

Learn what current, pending, confirmed, history, and permanent DTC labels mean, how they change, and what each status tells you to test next.

Use this J2534 programming checklist to prepare OEM access, validated interface drivers, a stable laptop, battery support, and recovery information.

Combine a regulated EVAP smoke test with purge and vent commands, fuel-tank pressure data, and monitor checks to find and verify vapor-system faults.

Use freeze-frame data, fuel trims, Mode $06 monitor results, and cylinder-balance testing to identify ignition, fuel, air, or mechanical misfires.